AC LED Highmast Light

The Ultimate Solar-Powered Lighting Solution for Large Spaces

Starka provides top-quality LED high mast lights designed to brighten large open spaces effortlessly. Our unique lighting systems run on advanced technology, ensuring a long product life and zero electricity bills. Trusted by businesses across India, these lights are perfect for a wide range of applications, from highways to factory yards. With a strong, weather-proof design, Starka gives you reliable, powerful illumination that you can count on every single night.

IP66 Weatherproof rating

Directly Connect to grid

2 & 5 Years Standard warranty

Request a Quote

Explore Our Models

Product Overview

About the Product

The Starka high mast light is built with premium parts, including a highly efficient BIS-approved solar panel and a bright luminary featuring an inbuilt lithium-ferrophosphate battery. It uses high-lumen LEDs to provide powerful and clear light over vast areas. The system features a high-quality, rust-proof structure that is securely installed on different types of poles, including Tubular and Octagonal designs. Installation is very easy, and we proudly supply these complete lighting solutions all over India.

Core Features

Smart Features for Independent Outdoor Security Monitoring

Request a Quote

Ideal Lighting Applications

See the different public and private places where our lights shine the brightest

Deep Dive into Quality

Product Key Features

Take a closer look at the advanced components that power our solar solutions.

Brightness

The high-lumen LEDs give out a very strong and clear light. This keeps drivers and walkers safe during the darkest hours.

Battery (LiFePo4 )

The built-in LiFePo4 battery is known for its safety and long life. It holds enough charge to keep the lights on even during cloudy days.

Solar Panel (BIS Approved)

We use a separate, BIS-approved solar panel that is highly efficient. It grabs sunlight all day to make sure the battery is fully charged.

Controller (MPPT)

An advanced MPPT charge controller manages the energy flow. It makes sure the battery charges safely and perfectly every single time.

dusk-to-dawn

The dusk-to-dawn feature means no manual switching is needed. The system senses the daylight and works completely on its own.

Dimming

The auto-dimming function smartly reduces the light late at night. This clever trick saves stored energy and makes the battery last much longer.

FREQUENTLY ASKED QUESTIONS

Your Questions Answered

Starka’s AC LED High Mast Systems light up large open areas using high-power LED flood lights on galvanised octagonal masts, with smart controls and raising-lowering mechanisms.

1. What is an AC LED high mast lighting system?

An AC LED high mast system is a tall octagonal or polygonal pole fitted with several high-power LED flood lights that run on mains AC electricity to illuminate large open areas. Starka’s high masts use OSRAM LED flood lights operating on 230V AC, 50Hz, mounted on a luminaire ring at the top of a hot-dip galvanised mast. A weatherproof control panel with MCB, surge protection device and timer manages the system, and options like dimming, remote monitoring and energy monitoring can be added as per your requirement.

2. What heights are available for AC high mast poles?

AC high masts are available in a wide range of heights, generally from 6 metres to 30 metres, and even taller as per the area and lighting requirement. Common Starka configurations include 120W x 5 lights on a 9-metre octagonal pole and 200W x 6 lights on a 9-metre octagonal pole. The mast height, number of lights and wattage are designed according to the area size, required lux level and site conditions such as wind load and soil.

3. Which LED flood light wattages are used in Starka AC high masts?

Starka AC high mast systems use LED flood lights of 100W, 120W, 150W and 200W. The number of lights and the wattage of each light can be increased or reduced as per your lighting requirement, so the system delivers the right brightness for a highway junction, stadium, yard or factory. Because Starka manufactures the lights and drivers in-house, the configuration can be fully customised to match tender drawings and lux calculations.

4. How does an AC high mast work?

The main supply of 230V or 415V AC, 50Hz is fed to the high mast’s control panel, where the MCB, timer and surge protection device control and protect the electricity. From the control panel, the AC supply goes to each LED driver, which provides the LEDs with a constant, regulated voltage and current so they glow steadily. Sensors such as LDR, PIR and lux sensors and dimming controls adjust when the lights turn on and how bright they are, while surge, over-voltage, over-current and short-circuit protection keep the LEDs working for a long time.

5. Which sensors are used in AC high mast lights?

Starka AC high masts can use an LDR (light dependent resistor) sensor, a PIR motion sensor and a digital timer. The LDR senses darkness and switches the lights ON automatically in the evening and OFF in the morning, so nobody has to operate them manually. A digital timer can run the lights to a fixed schedule, and a PIR sensor can increase brightness when movement is detected, helping you save energy during low-activity hours.

6. How are the lights on a high mast replaced or serviced?

If the high mast has a manual or motorised raising and lowering arrangement, the whole luminaire ring can be brought down to ground level to check, clean or replace lights safely. This winch system, with wire rope and pulleys, makes maintenance easier, faster and safer than climbing the mast. If the mast does not have a lowering arrangement, technicians need to use a ladder or lifting platform to reach the lights, which is why Starka recommends a raising and lowering system for taller masts.

7. Can the number of LED lights on a high mast be increased or reduced?

Yes. The number of LED flood lights and the wattage of each light on a Starka AC high mast can be increased or reduced according to the site requirement and lighting conditions. For example, a larger area or a higher lux requirement may need more lights or higher wattage, while a smaller area can use fewer lights to save energy. Starka’s team designs the configuration based on area size, mast height and required lux level.

8. What is included in the AC high mast product kit?

The kit includes the high mast pole as per requirement, foundation bolts, base plate, LED flood lights, luminaire mounting ring, nut-bolts and the cable from the lights to the control panel. It also includes the motorised or manual winch system, wire rope, junction box, control panel, surge protection device, LDR sensor, MCB, FRP box, DWC pipe, armoured cable and electrical tape. Everything is supplied as per the approved design so that your installation team has a complete system on site.

9. How is an AC high mast installed?

First select the location by checking the available electrical supply, wind conditions and lighting requirement, then build an RCC foundation as per the approved structural drawing and fix the anchor bolt assembly using a template. After the foundation has cured, assemble the mast sections, erect the pole with a crane while checking vertical alignment, tighten the foundation bolts and fit the luminaire mounting ring and flood lights with their beam angles set as per the lux calculation. Install and test the winch system, fit the weatherproof control panel with MCB, contactor, SPD and timer, lay and terminate the cables, provide proper earthing, and test insulation, continuity and voltage before switching the system ON.

10. Where are AC LED high mast systems used?

AC LED high masts are used wherever a large open area needs bright and uniform lighting, such as highways, interchanges and roads, industrial areas and factories. They are also used in railway yards and stations, airports, ports and harbours, stadiums and sports grounds, municipal and public areas, parking areas and large commercial complexes. Starka’s LED high masts deliver this coverage while consuming much less electricity than conventional sodium or metal halide lights.

Quality Assurance